ADHCrete G-C Clean Reg
ADHCrete G-C Heavy Duty
Sealers
ADHSEAL 200 IMPREGNO
ADHCRETE S-T CLEAN GEN
Package: 500 ml, 1 ltr, 5 ltr
Product Description
A fast acting, safe, non-acidic water based cleaner that can be used for daily maintenance of floorings made with tile and stones. It is specially formulated for cleaning dust, dirt, grease and other difficult stains. It will not harm the polished stone surface. ADHCrete S-T Clean can used for regular and daily maintenance of tile and stone surface.
APPLICATION
- Interior
- Exterior
- Floor and wall
- Bathrooms
- Kitchens
ADVANTAGES
- Cost effective, fast acting
- Easy to use
- Environment friendly
- Non-acidic
Note
- It is recommended to test apply on a small area of actual surface and make sure that the product is not harming the surface.
ADHCrete S-T Clean Gen
ADHCrete G-C Heavy Duty
Sealers
ADHSEAL 200 IMPREGNO
ADHCRETE G-C CLEAN REG
Package: 500 ml, 1 ltr, 5 ltr
Product Description
A cementitious grout and adhesive haze remover. It is a fast acting, acid based cleaner used to remove sanded grout and adhesive haze, joint cement and other hard water deposits. It is a highly effective cleaner for daily maintenance of tile and stone. It is safe and less reactive.
ADVANTAGES
- Flamed & honed Granite
- Sanded Grout
- Concrete & masonry
- Porcelain & Quarry Tile
- Ceramic & Vitrified tiles
- Not for acid sensitive surfaces
Note
- It is recommended to test apply on a small area of actual surface and make sure that the product is not harming the surface.
- Do not use ADHCrete G-C CLEAN REG on acid sensitive stones. eg. polished marble, limestone, etc. because it is an acid based cleaner.
ADHCrete S-T Clean Gen
ADHCrete G-C Clean Reg
Sealers
ADHSEAL 200 IMPREGNO
ADHCRETE G-C HEAVY DUTY
Package: 500 ml, 1 ltr, 5 ltr
Product Description
A super strong, powerful acid cleaner for removing sanded grout and residue of mortar, hard water deposits, rust and other heavy dirt. It is used as both interior and exterior cleaner.
ADVANTAGES
- Flamed & honed Granite
- Sanded Grout
- Concrete & masonry
- Porcelain & Quarry Tile
- Ceramic & Vitrified tiles
- Not for acid sensitive surfaces
Note
- It is recommended to test apply on a small area of actual surface and make sure that the product is not harming the surface.
- Repeated acid washing may harm glossiness of the surface
- Do not use ADHCrete G-C HEAVY DUTY on acid sensitive stones eg. Polished marble, limestone, etc.
ADHCrete S-T Clean Gen
ADHCrete G-C Clean Reg
ADHCrete G-C Heavy Duty
ADHSEAL 200 IMPREGNO
ADHSEAL NATURAL
Package: 500ml, 1 Ltr & 5 Ltr
Coverage: Approximately 100 sq.ft. / ltr
Product Description
It is a water-based, natural look, penetrating sealer that forms an invisible water repellent coating on substrates to resist stains, discolouration, efflorescence and soiling. Allows moisture vapour transmission. It is recommended for use on porous tiles, stones and cementitious grout joints for tiled floor and walls.
Application
Residential and commercial, ideal for soft and natural marble and porous tile
Can be used as a grout releasing agent by treating the tile before the application of grout
Uses
Shelf life is 12 months from the date of manufacturing if stored in factory sealed container.
Store under cover, away from direct sunlight and protected from extreme temperature.
In hot temperature conditions, it must be stored in a temperature-controlled environment i.e. less than 30°C.
ADVANTAGES
- Water-based, fireproof
- Weather resistant - protects tile, stone & bricks
- Easy to apply by brush or roller
Note
- Seals mortar and plaster
- Reduces the effect of efflorescence
- Protects from water and rain.
ADHCrete S-T Clean Gen
ADHCrete G-C Clean Reg
ADHCrete G-C Heavy Duty
ADHSEAL 200 IMPREGNO
ADHSEAL 200 IMPREGNO
Package: 500ml, 1 Ltr & 5 Ltr
Coverage: Approximately 100 sq.ft. / ltr
Product Description
Solvent base, flouro-chemical technology based sealer for protection of all medium to dense porous tile/stone and grout surfaces. Provides a natural look with maximum protection against the toughest oil and water based stains, wine, vinegar, alkalis and freeze-thaw damages. It penetrates into the surface and forms an invisible barrier by allowing vapourto escape. The low odourformula makes it easy to use with a durable, long-lasting seal. Ideal for interior as well as exterior application.
Application
Interior & exterior application of tile and stone surface
Wall and floor
Grout
Brick
Uses
Seals mortar and plaster
Reduces the effect of efflorescence
Protects from water and rain
Coverage Approximately 100 sq.ft. / ltr
ADVANTAGES
- Hydrophobic /oleophobic
- Natural look and nano-impregnating technology
- Easy to use, superior coverage
- Allows tiles and stones to breath
- UV resistant, Weather resistant
For Business inquiry fill our form and Toll Free Number +91 888 443 4971