Adhmixtures
TBM Adhcrete Adhmix TBM
Quick Set Adhcrete Bss-09 (PCE Adhmixture)
Sp-f Adhcrete Adhmix Sp -1
SF Adhcrete Adhmix SF
Hp-200 Adhcrete Adhmix Hp 200
TG
ADHCRETE ADHMIX TG
PACKET SIZE: 200 ml, 400 ml, 5 ltr, 20 ltr
Product Description
ADHCRETE ADHMIX TG is a high performance, latex based admixture specially designed for use with ADHCrete Tile Grout Superfine 2000 series cementitious grout. ADHMIX TG used in the place of water to provide flexibility to the system after curing.
ADVANTAGES
- Increased flexibility
- Easy cleaning - prevent from staining
- Resists powdering and cracking
- Chemical and thermal shock resistance
- Reduces water absorption
DOSSAGE
- 375 ml to 400 ml/ kg of cementitious grout
- 175 ml to 200 ml / Kg of Adhcrete 2000 coarse series Grout
WORKING PROPERTIES @70ºF (21ºC) ADHCRETE ADHMIX TG mixed with ADHCtere 2000 series cementitious Grout
Colour | Milky White |
---|---|
Pot Life | 1 Hour |
Time to Foot Trafic | 24 Hours |
Time to Heavy Trafic | 72 Hours |
Wet Density | 1730 Kg/m3 |
- Interior and exterior use for coarse and fine series grout.
- For improved performance used in all types of ceramic tile, marble & natural stones, etc.
APPLICATION
TECHNICAL INFORMATION
ADMIX TG | @27 ± 1°C |
Appearance | White emulsion |
Specific gravity | 1.02 |
VOC Content | 1.03 g/l |
TG Adhcrete Adhmix TG
Quick Set Adhcrete Bss-09 (PCE Adhmixture)
Sp-f Adhcrete Adhmix Sp -1
SF Adhcrete Adhmix SF
Hp-200 Adhcrete Adhmix Hp 200
TBM
ADHCRETE ADHMIX TBM
PACKET SIZE: 5 ltr, 20 ltr
Product Description
ADHCRETE ADH MIX TBM is a concentrated latex admix is diluted with water on job site and then mixed with ADHScreed Auto Cure or ADHCRETE Readymade Plaster to make screed, plasters, coatings and thick mortar beds to get highly improved physical property & mechanical characteristics and it can be used for interior and exterior applications.
ADVANTAGES
- Interior and exterior installation
- High thermal, shock and chemical resistant Superior flexibility
- Increased bond strength and mechanical property
- Can use for repairing & patching of wall and concrete floor
Surfaces must be structurally strong. Remove all grease, oil, dirt, curing compounds, sealers or any other contaminant that would prevent good bonding. Glossy, lime washed or painted surfaces must be sanded, or abraded, and stripped off all contaminants. Concrete floor must be free of efflorescence and not subject to hydrostatic pressure. Concrete floors should have a course finish to enhance the bond. Roughen the surface by sanding or abrading, then rinse and allow to dry.
Use required amount of ADHCRETE ADHMIX TBM and water for 50 kg powder. Add liquid to the pre-blended powder slowly under mixing. Mix by hand or use a medium speed drill mixer (250 – 500 rpm speed) to achieve a smooth, paste-like consistency. It can also be mixed by creating a well in the middle of the mixed product, gradually add pre-measured water mixing the product by shovel or trowel until a dry but moist workable mix is achieved. Stir occasionally, but do not add more water. Transfer the mixed product into a clean container and carry and pour into recess.
COVERAGE CHART
Thickness | ADHPlast ready made Plaster | ADHMix TBM | WATER |
---|---|---|---|
12mm | 50 kg | 1 Ltr | 25+ 3 sqft |
25mm | 50 kg | 1 Ltr | 14+2 sqft |
35mm | 50 kg | 0.5 Ltr | 09+2 sqft |
50mm | 50 kg | 0.5 Ltr | 05+2 sqft |
TECHNICAL DATA
Mixing ratio | Refer table |
---|---|
Pot Life | Approx 4Hrs |
Time to normal foot traffic | 18-24 hrs |
Time to heavy foot traffic | After 72 hrs |
Compressive strength | >20 MPa |
Flexural strength | >4 Mpa |
Tensile strength | >2 MPa |
TG Adhcrete Adhmix TG
TBM Adhcrete Adhmix TBM
Sp-f Adhcrete Adhmix Sp -1
SF Adhcrete Adhmix Sf
Hp-200 Adhcrete Adhmix Hp 200
QUICK SET
ADHCRETE BSS-09 (PCE ADHMixture)
Package Size: 5 ltr, 20 ltr & 220 ltrs
Product Description
ADHCrete BSS-09 (PCE ADHMixture) is a high range water reducing and accelerating admixture (ASTM C494 Type E). It gives high early strength. ADHCrete BSS-09 is new generation super plasticizer containing Carboxylic (COOH) group instead of sulphonic (SO3H) as in case of Melamine or Naphthalene Formaldehyde Sulphonate.
Applications
It is a ready-to-use liquid which is dispensed into the concrete together with the mixing water. The plasticizing effect and water reduction are higher if the admixture is added to the damp concrete after 70 to 90% of the mixing water has been added. The addition of ADHCRETE BSS-09 (PCE ADHMixture) to dry aggregate or cement is not recommended. Thorough mixing is essential and a minimum mixing cycle, after the addition of the ADHCRETE BSS-09 (PCE ADHMixture), of 60 seconds for forcedaction mixers is recommended.
ADVANTAGES
- High water reducing ability
- Improvement in early strength
- Improve concrete setting time
- Increase compressive and flexural strength of concrete at all ages
- More than 40 % water reduction in high performance concrete
- Linear water reduction throughout the recommended dosage
- Faster recycle of formwork owing to accelerated early strength development
DOSAGE
0.2 to 1.0 kilograms/100 kilograms Cementatious material for most concrete mixes using typical concrete ingredients. However, for silica fume concrete, the dosage may fall outside recommendation and site trials is recommended in case of critical workability and setting time parameters as per requisites to fix optimum dosage. To be mixed with water and added to cement aggregate mixture. The best formulation should be made on site after completing enough tests.
TECHNICAL INFORMATION
Nature | Synthetic poly carboxylic Ether |
Colour | Dark Brownish liquid |
Specific Gravity | 1.220 to1.240 |
Solid Contents | 30+1% |
pH Value | 7.0 to 9.0 |
Solubility | Readily soluble in water |
Sodium Sulphate | Max2.2% |
TG Adhcrete Adhmix TG
TBM Adhcrete Adhmix TBM
Quick Set Adhcrete Bss-09 (PCE Adhmixture)
SF Adhcrete Adhmix SF
Hp-200 Adhcrete Adhmix Hp 200
SP-f
ADHCrete ADHMix SP -1
PACKET SIZE: 5 ltr, 20 ltr & 220ltrs
Product Description
ADHCrete ADHMix SP-1 SUPER PLASTICIZER is a specially formulated integral cement waterproofing compound liquid form which contains selected plasticizer, surface active agents and additives. it is to produce fluidity in the mix and improve the workability of concrete, mortar or grouts. It provides very high water reduction. ADHMix SP-1 is a free flowing liquid which disperses evenly and easily in the water.
ADVANTAGES
- Imparts extreme fluidity
- Minimizes shrinkages crack in cement plasters
- Higher early and ultimate strength.
- Placing with no vibration
- Improves surface finish, cohesion
- Minimizes the permeability and increase the waterproofing properties of concrete and cement mortar.
- Produce denser and more durable concrete giving better protection to steel against corrosion
- Good water reduction helps to improve durability
- Chloride free
CAUTION
- Do not reuse container for storage of consumable item.
- ADH SP-1 is not a fire or health hazed
- If accidently ingested, seek immediate medical attention
- Keep away from children and animals
As with all chemical products, care should be taken during use and storage to avoid
AREA TO USES
- Precast and pre stressed concrete
- Floor slab and girders
- Wall, column, beam and ceiling
- Lowers water cement ratio
- Ready mix concrete
- Pump concrete and mass concrete
TECHNICAL INFORMATION
Nature | Synthetic Polycarboxylic Ether |
Colour | Dark brownish Liquid |
Solid Contents | 30 + 1% |
pH Value | 7.0 to 9.0 |
Solubility | Readily soluble in water |
Sodium Sulphatent | Max. 2.2% |
TG Adhcrete Adhmix TG
TBM Adhcrete Adhmix TBM
Quick Set Adhcrete Bss-09 (PCE Adhmixture)
Sp-f Adhcrete Adhmix Sp -1
Hp-200 Adhcrete Adhmix Hp 200
SF
ADHCRETE ADHMIX SF
PACKET SIZE: 5 ltr
Product Description
It is a super flexible latex admixture for use with thinset adhesives to get very high flexibility along with strong bond strength for installation of tile or stones on most dry wall applications specially plywood. It is specially formulated to use with ADHCrete G1 SUPERIOR GRADE HIGH PERFORMANCE TILE ADHESIVE for strong and super flexible bond.
Application
It is used in place of water with thinset tile adhesive installation. For installation of ceramic tile and natural stone on plywood and variety of substrates.
ADVANTAGES
- Easy to use
- Non hazardous, non- ammable liquid
- Make high strength shock and impact resistant
- Strong super flexible very good adhesive to many substrate
COVERAGE
Approximately 85 - 90 sqft when 7.5 ltr of ADHMIX SF latex admix with 30 kg ADHCRETE G1 thinset tile adhesive for 3mm bed thickness.
Use 5 ltr of ADHMix SF Latex based ADHCrete admixture for mixing 20 kg powder. Take ADHMix SF in a 20 Litres clean pail and pour powder slowly to the pail under slow mixing. Mix by hand or use a low speed drill mixer (150 – 200 rpm speed) to achieve a smooth, paste-like consistency. Let the homogeneously mixed adhesive mixture slake or stand 5 -10 minutes, stir again and use. Stir occasionally, but do not add water. When properly mixed, troweled ridges will stand without slump. Use a required size notch trowel to ensure properly. mixed, troweled ridges will stand without slump. Use a required size notch trowel to ensure proper coverage under tiles. Using the flat side of the trowel, apply a skim coat of mortar to the surface With the help of properly notched or teeth side of the trowel held at a 45° angle, apply additional mortar to the surface, combing in one direction. Material in the bucket will remain workable for approximately 3-4 hours.
Caution
- 1. Store in cool and dry place.
- 2. High Humidity and moisture will affect product property
- 3. Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush throughly with water.
- 4. Do not take internally. Silica sand mauy cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
- 5. Protect finished work from traffic or damage by other trades for an extended period of time during cold weather conditions. At room Temperature conditions 70 F(20 C) protect overnight.
- 6. Keep out of reach of children.
Technical information
Appearance | Brown milky White |
Specific Gravity | 1.02+1.04 |
PH Value | 7 to 8 |
Solid (%) | 25+1 |
TG Adhcrete Adhmix TG
TBM Adhcrete Adhmix TBM
Quick Set Adhcrete Bss-09 (PCE Adhmixture)
Sp-f Adhcrete Adhmix Sp -1
SF Adhcrete Adhmix SF
HP-200
ADHCrete ADHMix HP 200
PACKET SIZE: 1 Ltr, 5 Ltr, 20 Ltr, 220 kg container
Product Description
ADHCrete ADHMix HP 200 is a highly effective water reducing compound for promoting accelerated hardening and pre-flowing cement mortar, concrete hollow block, paver block and Aceblock etc. It also gives early strength and improved final strength to the concrete structures
Dosage
ADHCrete ADHMix HP 200 can be used in the range of 200ml to 300ml per bag of cement (50 Kg) depending upon the desired workablity. Over dosage would increase the workability at the expense of reduced setting time, however final concrete strength would not change.
Application
Superplasticizer adhmixture for grey cementitious paver block and tiles.
ADVANTAGES
- Reduction in water cement ratio
- Reduction of setting time
- High strengths after 6-8 hours.
- Early demoulding
TG Adhcrete Adhmix TG
TBM Adhcrete Adhmix TBM
Quick Set Adhcrete Bss-09 (PCE Adhmixture)
Sp-f Adhcrete Adhmix Sp -1
SF Adhcrete Adhmix SF
Hp-200 Adhcrete Adhmix Hp 200
ADHCOAT IWA
LIQUID INTEGRAL WATERPROOFING ADMIXTURE
Product Description
ADHCOAT IWA- Liquid Integral Waterproofing Admixture will drastically reduce water absorption in structural and precast concrete. It is latex based admixture which waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus, it is more efficient compared to traditional powder waterproofs as its use results in a two-fold improvement of concrete or mortar. Suitable for use in below ground structures, reinforced concrete in marine areas, piles, water retaining structures, manholes, and waste water treatment and desalination plants.
Uses
To minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc.
ADVANTAGES
- Improve workability an easy to use
- Liquid admixture: Instant and complete dispersion throughout the mix. Uniform waterproofing throughout concrete matrix.
- High efficiency: Dramatic reduction in permeability of concrete/ mortar
- Improved workability: Improves compaction of concrete and mortar, even where harsh sands or aggregates are used.
- Improved concrete quality: Minimizes porosity and honey combing. Produces dense homogenous concrete.
- Improves durability and compressive strength
DOSAGE
200 ml per 50 kg of cement
SHELF LIFE & STORAGE
Shelf life is 12 months from the date of manufacturing if stored in factory sealed container. Store under cover, away from direct sunlight and protect from extreme temperature. In hot temperature conditions, it must be stored in a temperature-controlled environment i.e. less than 30° C.
TECHNICAL INFORMATION
Appearance | Brown |
Specific Gravity | 1.02 to 1.04 |
pH Value | 7 to 8 |
Solids | 25 + 1 |
For Business inquiry fill our form and Toll Free Number +91 888 443 4971